[nmglug] ftp over vpn,

[Andres Paglayan]

Im sure it reads the conf file, if I take the password off it will prompt,
but after running vpnc-connect there is no change at all in the route 
display,
will check again with them what I should enter in the .conf file,
Thank you very much for your feed-back


Ed Brown wrote:

>Andres,
>
>The vpnc-connect script should handle setting up the routing info for
>you, once your configuration file is correct.  (Take a look at the last
>few lines of vpnc-connect, there are probably several 'route' commands.)
>
>After running vpnc-connect, just try this to see if you are really
>connected:
>ping ip.of.ftp.server
>
>I wonder if the 'default.conf' file is being consulted: that might just
>be a starting point conf file.  You might try renaming your edited
>version of 'default.conf' to 'vpnc.conf'.  At least that's what the
>config file was called when I was trying out vpnc.
>
>-Ed   
>
>On Thu, 2005-07-07 at 10:47, Andres Paglayan wrote:
>  
>
>>well, you might hit the nail,
>>I did configure /etc/vpnc/default.conf according to the settings I got 
>>from them,
>>I run vpnc-connect script and it shows running in the background.
>>I tried the
>>route add ftp.server.ip ws the.vpn.ip
>>and it says
>>SIOCADDRT: Network is unreachable
>>so I must be missing somethin in the use of vpnc
>>    
>>
>
>
>
>_______________________________________________
>nmglug mailing list
>nmglug at nmglug.org
>http://www.nmglug.org/mailman/listinfo/nmglug
>
>
>  
>