[nmglug] What is the model number of the SiL card?

Tim Emerick timothyemerick at yahoo.com
Thu May 26 17:57:45 PDT 2005


Here is the web page for the actual card:

http://www.koutech.com/proddetail.asp?linenumber=105

Here's some dmesg stuff:

SiI680: IDE controller at PCI slot 0000:02:03.0
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 11 (level, low) -> IRQ 11
SiI680: chipset revision 2
SiI680: BASE CLOCK == 133
SiI680: 100% native mode on irq 11
    ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
    ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
hde: WDC WD800BB-00CCB0, ATA DISK drive
ide2 at 0xd08b1080-0xd08b1087,0xd08b108a on irq 11
hde: max request size: 64KiB
hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host2/bus0/target0/lun0: p1
hdg: WDC WD800BB-00CCB0, ATA DISK drive
ide3 at 0xd08b10c0-0xd08b10c7,0xd08b10ca on irq 11
hdg: max request size: 64KiB
hdg: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
 /dev/ide/host2/bus1/target0/lun0: p1
PDC20265: IDE controller at PCI slot 0000:02:06.0
ACPI: PCI interrupt 0000:02:06.0[A] -> GSI 10 (level, low) -> IRQ 10
PDC20265: chipset revision 2
PDC20265: 100% native mode on irq 10
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide4: BM-DMA at 0xcc00-0xcc07, BIOS settings: hdi:pio, hdj:pio
    ide5: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdk:pio, hdl:pio


Tim
--- Mik <wa7bsz at yahoo.com> wrote:
> I would be interested to know about the model number of the SiL card. 
> Maybe it was easy to install in a bad mode.  
> 
> The write speed sounds roughly like a comcast download speed.
> 
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Yahoo! Small Business - Try our new Resources site
> http://smallbusiness.yahoo.com/resources/
> 
> _______________________________________________
> nmglug mailing list
> nmglug at nmglug.org
> http://www.nmglug.org/mailman/listinfo/nmglug
> 


		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new Resources site
http://smallbusiness.yahoo.com/resources/




More information about the nmglug mailing list