[nmglug] can't boot USB drive & apt-get dist-upgrade

[nick pitlosh]

no, i'm sending you on a wild goose chase. as soon as you burn the cd,
it flies away honking.

On Fri, Feb 10, 2012 at 4:41 PM, BrianO'Keefe <okeefe at cybermesa.com> wrote:
> Thanks. I did a quick overview of it and downloaded it but haven't installed
> it. Is it applicable to what I'm trying to do?
>
> Brian
>
>
> On 02/10/2012 04:16 PM, nick pitlosh wrote:
>
> take a look at the plop boot manager its educational, most grub's are
> set up with uuids rather than the classic, btw
>
> On Fri, Feb 10, 2012 at 4:04 PM, BrianO'Keefe <okeefe at cybermesa.com> wrote:
>
> When I choose to boot from USB device I get a grub menu to choose the kernel
> to boot. I pick one, doesn't seem to matter which, and the boot starts but I
> know no way to interrupt it to choose from the USB HD BIOS an option to boot
> from the USB drive. How can I do that , if I even can?
>
>
> On 01/31/2012 06:20 PM, Rob Haag wrote:
>
> This is just an inquiry to your problem... Do you think that it is booting
> to the USB drive, then the Grub installed on that one is attempting to boot
> your internal HDD (because Grub on the USB drive is probably configured to
> boot off of the 1st partiion of the 1st hard disk) ? This could occur if you
> used the PC's bios to choose to start from the USB disk (interrupt the
> pc's startup (not the bootloader's) to choose a boot device). If that is the
> case, you could interupt Grub (on the USB disk) and tell it to boot from the
> USB disk...
>
> On Tue, Jan 31, 2012 at 7:47 PM, BrianO'Keefe <okeefe at cybermesa.com> wrote:
>
> Sorry about the double post but e2fsprogs is installed.
>
> Brian
>
>
> On 01/31/2012 05:46 PM, BrianO'Keefe wrote:
>
> A while back I cloned my HD to a larger HD using dd and the advice of all
> the great guys on this list. It worked perfectly and after the cloning I
> booted the new drive as a USB device and that also worked perfectly so I
> replaced the smaller HD with the new one.
> I had an idea that I could boot the old drive as a USB device and try the
> apt-get dist-upgrade on that version, which is also Ubuntu 10.10 though
> without some updates over the last several months. This would let me know
> how the partial upgrade worked. However....
> When I try to boot the USB drive grub defaults to the newer, installed HD
> and the USB drive won't boot. I also can't see the drive in nautilus but it
> does show up in GParted as mounted. There is a info flag with it that
> states,
> "Unable to read the contents of this file system! Because some of this
> some operations may be unavailable.
> The following list of software packages is required for ext4 file system
> support: e2fsprogs v1.41+."
>
> If the file system is unreadable then the unbootability makes sense but
> what would cause it to become that way?
>
> Thanks
>
> Brian
>
>
> _______________________________________________
> nmglug mailing list
> nmglug at lists.nmglug.org
> http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org
>
>
> _______________________________________________
> nmglug mailing list
> nmglug at lists.nmglug.org
> http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org
>
>
> _______________________________________________
> nmglug mailing list
> nmglug at lists.nmglug.org
> http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org
>
>
> _______________________________________________
> nmglug mailing list
> nmglug at lists.nmglug.org
> http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org
>
> _______________________________________________
> nmglug mailing list
> nmglug at lists.nmglug.org
> http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org
>
>
>
> _______________________________________________
> nmglug mailing list
> nmglug at lists.nmglug.org
> http://lists.nmglug.org/listinfo.cgi/nmglug-nmglug.org
>